'
产品参数
伊士曼cab能够:
促进铝粉的定向性能,增强油漆的闪光效果。提高湿涂层溶剂的释放能力,加速溶剂的挥发,从而降低了生产过程中的灰尘吸附现象,并且极大的加速了生产过程。抑制层间相互溶解的作用,有效防止了层与层之间的渗色、咬底。在木器涂料中集中体现在流平性能、干燥性能及不黄变之特性。
终端产品 ca cab cap 效能
金属用涂料 * 增进密着,耐盐雾,抗氧化,催干,增进银浆定向排列,耐黄变,减少缩孔,控制黏度,抗回黏
塑料用涂料 * 催干,增进银浆定向排列,耐黄变,减少缩孔,干爽,抗回黏
木器用涂料 * 催干,增进银浆定向排列,耐黄变,减少缩孔,干爽,抗回黏
油墨 * * * 催干,增进银浆定向排列,耐黄变,减少缩孔,控制黏度,抗回黏
包装材离型膜 * 良好离型效果,气味小,强度高,抗uv,耐热,耐油
uv添加 * 抗收缩翘曲
皮革处理 * 催干,耐黄变,减少缩孔,控制黏度,抗回黏
食品包装 * 气味低,极佳的阻油性,可用于印刷油墨
布上胶 * 提高硬度,降黏,提高黏着性,改善滑爽性
真空电镀漆 * 使表面帄滑,增进银浆定向排列,耐黄变
分散颜料 * 良好润湿性
汽车涂料 ** 催干,增进银浆定向排列,耐黄变,减少缩孔,干爽,抗回黏
product data sheet
eastman™ cellulose acetate butyrate (cab-171-15)
application/uses
coatingscoatings for automotive plasticscoatings for clothcoatings for leathercoatings for paper/paperboardcoatings for plasticcoatings for woodtruck/bus/commercial vehicles
product description
remarkable polymers with a renewable backbone provided by nature itself.
when cellulose is esterified with both acetyl and butyryl radicals to form the mixed ester, cellulose acetate butyrate, many of the desirable properties of both esters are obtained. cab 171-15 has the lowest butyryl content in the series of eastman™ cellulose acetate butyrates. it is supplied in dry, powder form and is offered as a filtered product. films prepared from cab 171-15 offer superior toughness and hardness as compared with films prepared from other mixed esters. also coatings based on cab 171-15, which has less solubility and compatibility than the higher butyryl cabs, usually offer excellent resistance to chemicals, oils, and greases. cab 171-15 exhibits the lowest degree of solubility of the eastman™ cellulose ester family. it is soluble in low molecular weight ketones, chlorinated hydrocarbons, and nitroparaffins. eastman™ cellulose esters are based on up to sixty percent cellulose, one of the most abundant natural renewable resources.
typical properties
property typical value, units
butyryl content 17 wt %
hydroxyl content 1.5%
viscosity a 57.37 poise
color b 225 ppm
haze b 55 ppm
fiber 325
acidity as acetic acid 0.0325 wt %
ash content 0.05%
refractive index 1.475
melting point 230-240°c
specific gravity 1.26
wt/vol 1.26 kg/l (10.5 lb/gal)
bulk density
poured
224 kg/m3(14 lb/ft3)
tapped
256 kg/m3(16 lb/ft3)
dielectric strength 784-984 kv/cm (2-2.5 kv/mil)
glass transition temperature (tg) 161°c
tukon hardness 27 knoops
acetyl content 29.5 wt %
'
东莞市樟木头达丰塑胶原料经营部
刘海峰
18680629079
中国 东莞